USA - FEBRUARY 2024 17 HIP HOP, HIP HOP HIGH BACK AND HIP HOP JUNIOR SPECIFICATIONS • All models ship assembled except high back and wood leg models. Assembly of legs and the optional tablet is required on site. • Fabric/fabric, fabric/vinyl and vinyl/vinyl upholstery is only available for the double ogive and armchairs. The first upholstery code is for the backrest, the second upholstery code is for the seat. • If dual upholstery combination is from two different grades, list price is the highest grade of the two. • Leather is not available. • An optional electrical module composed of one electrical outlet, one USB-A and one USB-C ports can be installed in factory on the seat's structure and will be placed on the front rignt, once seated. • All electrical modules are rectangular, including on ottomans and round tables. Specify this option by adding PC_, PCL_, or PCR_, depending on the model (maximum of 1 per unit). Complete the module selection to define its finish: Black (K) or Silver (S). The modules come installed. • The optional 9" (229 mm) deep laminate back tablets are installed at a height of 42" (1067 mm). • Please refer to the Lacasse Sampler for laminate choices. • C.O.M./C.O.V. available. Please refer to page 49 of the current Arold Price Book. QuickShip Program • Visit the QuickShip Program on our website for available models. DUAL UPHOLSTERY APPLICATION SAMPLE ORDER: HC60H-E8- DN01 - DN03 -NA-PCRS 2 1 CALCULATING RADIUS: The radius is the linear distance calculated from the center of the circle (point 0) to the inner circumference of the module. 78" (1981 mm) 48" (1219 mm) 18" (457 mm) ELECTRICAL MODULE: Specify the position of the electrical module based on the model type. LEG OPTIONS: 9½" (241 mm) height for Hip Hop and Hip Hop High Back products and 6" (152 mm) Hip Hop Junior products. Standard leg E Steel, curved. 2 colors are offered. (Black not offered on Hip Hop Junior products) Optional leg K Laser cut steel. (Not offered on Hip Hop Junior products.) 2 colors are offered. CALCULATING DEGREES: The degree of the angle is calculated by dividing the entire circumference (360°) by the number of modules. E.g.: 360° divided by 6 modular units provides an angle of 60°. Thus, 12 modules of 30° form a circle (360°). 30° 45° 60° LAMINATE BACK TABLET: To order and indicate an optional laminate back tablet, simply add a laminate code. Order example: HC60H-E8-AM24-AM24-SNO When a back laminate tablet is not required, specify NA. GANGING RULE: As indicated in this list, and for stability purposes, some modules must be ganged to another module. The HC30HBA and HC60HBA modules cannot be ganged because they are separated by lateral privacy arms. Please refer to the Arold Accessories Addendum for information on ganging brackets. 1 2 2 1 1 1 1 2 1 1 Positioned in the middle of the laminate surface, with the exception of the HRTM36, which will be positioned near the middle of the half-moon shaped surface. Positioned on the front right side, once seated. For wedge benches, it’s always located inside the curb. Positioned on the side of the back of a high back chair only, once seated. Specify PCL_ (PC module on left) or PCR_ (PC module on right). Positioned in the center of the laminate surface. Optional leg W Wood, stained. 2 colors are offered. Hip Hop products with metal legs cannot be retrofitted with wood legs. (Not offered on Hip Hop Junior products.) HC4830H H4830CH H1860CH HC HC30H Specs_Tablette Hip Hop High Back HC1860H HC7830H HC4845H HC4830H H7830CH H4845CH H4830CH H1860CH HC60H HC30H Specs_ModulePC_et_2-ton Specs_2_bras Specs_Tablette Hip Hop High Back HC1860H
RkJQdWJsaXNoZXIy ODQzOTcy