C.I.T.E. > Price Book > USA > 02.2024

C.I.T.É. 10 C.I.T.É. USA – FEBRUARY 2024 = NOT PART OF THE QUICKSHIP PROGRAM CNNNN-LBD1212WM C_NNS-TCADT_ _ _ _ C_NNS-TCAD_ _ _ _ C_N_ _-CRE______ C_N_ _-CRC______ CNNNS-FFEED23 ELECTRICAL INFEED There are a number of ways for bringing electrical power to surfaces, namely from a power source located in the floor, in a wall or in the ceiling. 28" (719 mm) 18" (450 mm) 21 1 / 4 " (540 mm) 21 1 / 4 " (540 mm) / ELECTRIC CABLE ACCESS DOOR ELECTRIC CABLE ACCESS DOOR Infeed from floor: The installation of the electrical feed must be carried out by a professional electrician. Cables for floor infeed are available in lengths of 60" (1524 mm) or 72" (1829 mm), assuming the piece of furniture is 29 7 / 8 " (757 mm) tall and that the first duplex is located 18" (450 mm) from the surface edge. The center base with wire management raceway (CNNNS-LBD1212WM or CNNNS-LBS912WM) is equipped with a lockable door. Power can be fed to: the end of the work surface; the center, thanks to the wire management raceway; the storage base equipped with a wire management raceway (C_N_ _-CRE___ and C_N_ _-CRC___); the base of the 120° surface; or from any location beneath the raceway, using FFEED23 products, when the power source is in the floor. Each electrical panel can feed 2 circuits comprising a maximum of 26 double outlets (13 per circuit). CNNN-CFEED120 CNNN-CFEED120 Infeed from ceiling: Examples of electrical specifications: Rectangular surfaces: 120° surfaces: 108" (2743 mm) 18" (450 mm) 28" (719 mm) Power feed is plugged at one end of the piece of furniture or at any point along the top of the raceway. To this end, a 120"-tall (3000 mm) column is supplied, with the appropriate hardware. The cable is 132" (3353 mm) long, assuming the piece of furniture is 29 7 / 8 " (757 mm) tall and that the first double power outlet is located 18" (450 mm) from the surface edge. A contact plate may be installed along the wire management raceway's aluminum rails, and it can accommodate up to 4 connections. Adapters are included. LGC-PASS36 LGC-4TRAC496C_ LGC-4TRAC496C_ LGC-FFEED_ _ Two double-sided surfaces 60" D x 96" W (1500 mm x 2400 mm) are connected to an electric power source by the sequence of components shown in the diagram above. 120° surfaces 54" D x 60" W (1350 mm x 1500 mm) are connected to an electric power source by the sequence of components shown in the diagram above. LGC-4TRAC260C_ LGC-PASS36 LGC-PASS36 LGC-4TRAC260C_ LGC-4TRAC260C_ LGC-FFEED_ _