Paradigm > Price Book > USA > 02.2024

SPECIFICATIONS 13 PARADIGM Panel System USA – FEBRUARY 2024 SUPPORTS AND BASES Supports Configuration of brackets Without grommets • Supports are sold separately from work surfaces, with the exception of transaction countertops. • Supports are coated with durable electrostatic paint. Cantilever supports • Left or right cantilever supports (sold as a pair) are fastened to the ends of a work surface. • A third cantilever support, left or right, is required when the surface width exceeds 60" (1524 mm). • They support work surfaces of all depths. • They are compatible with work surfaces that have a cable drop clearance. • Shared cantilever supports are installed between 2 work surfaces. • They are made of 14-gauge steel and equipped with an anti-dislodgement device. Corner or end brackets • Corner or end brackets support the back of a corner work surface. • They support the front of a work surface in order to stabilize a return panel. • They support a rectangular or trapezoidal conference work surface whose width is identical to that of the panel. • They support a 24" (610 mm) lower shelf of a suspended storage with drop-down door, when the lower shelf is installed on a panel of the same width. • They support the back of a work surface when a fixed pedestal is installed. • They are compatible with work surfaces that have a cable drop clearance. • They are made of 14-gauge steel and equipped with an anti-dislodgement device. Flat bracket • Flat brackets make it possible to set up a conference work surface with another work surface. Reinforcement bars • A reinforcement bar is recommended for any work surface when the distance between 2 cantilevers is 48" to 60" (1219 to 1524 mm). • A reinforcement bar is not a replacement for a support. • The reinforcement bar supports the 24" (610 mm) lower shelf of a suspended storage with drop-down door when the lower shelf is installed on a panel with a different width. With cable drop clearance at back With cable drop clearance at back and on 1 side With cable drop clearance at both backs With grommets WORK SURFACES (cont’d) 54" and - (1372 mm and -) 60" and + (1524 mm and +) Cantilever supports Reinforcement bar Flat bracket Corner or end bracket Shared cantilever support Corner or end bracket Corner or end bracket Shared cantilever support Cantilever support Corner or end bracket Corner or end bracket Reinforcement bar Cantilever support Shared cantilever support Flat bracket