Paradigm > Price Book > USA > 02.2025

PARADIGM Panel System > Price Book > USA > February 2025 Office Furniture Solutions Modifications: February 2023 Page 34 Removed surface panel frame KLGC-LP_ _P February 2023 Page 35 Removed wall-mounted shelf KMWZ and overhead KMWH February 2023 Page 36 Removed the KMHZ accessories

SPECIFICATIONS �� 3 PARADIGM PANEL SYSTEM �� 3 GENERAL INFORMATION �� 3 PANELS AND COMPONENTS �� 4-8 ELECTRIFICATION AND CABLE MANAGEMENT �� 9-11 LAMINATE GALLERY PANELS �� 12 WORK SURFACES �� 12-13 SUPPORTS AND BASES �� 13-14 METAL STORAGE FURNITURE �� 15 LAMINATE STORAGE FURNITURE �� 15-16 PARADIGM PRICE LIST ��17 MONOLITHIC PANELS �� 17 SEGMENTED PANELS �� 19 1 GLASS UPPER SEGMENT �� 19 1 FABRIC UPPER SEGMENT �� 21 1 LAMINATE UPPER SEGMENT �� 22 FABRIC AND GLASS UPPER SEGMENTS �� 23 2 FABRIC UPPER SEGMENTS �� 23 LAMINATE GALLERY PANELS �� 24 SCREENS AND STACKABLE PANELS �� 26 PANEL COMPONENTS �� 27 ELECTRICAL COMPONENTS – 3-CIRCUIT SYSTEM �� 29 ELECTRICAL COMPONENTS – 4-CIRCUIT SYSTEM �� 29 ELECTRICAL ACCESSORIES �� 30 WORK SURFACES WITH CABLE DROP �� 31 STANDARD WORK SURFACES �� 32 WORK SURFACE SUPPORTS �� 34 WORK SURFACE BASES �� 34 METAL STORAGE FURNITURE �� 35 LAMINATE STORAGE FURNITURE �� 36 ACCESSORIES �� 38 Paradigm Panel System had achieved GREENGUARD Certification. GREENGUARD Certified products are certified to GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg. TABLE OF CONTENTS 2 PARADIGM Panel System USA – FEBRUARY 2025 PARADIGM Panel System

3 PARADIGM Panel System USA – FEBRUARY 2025 SPECIFICATIONS PARADIGM PANEL SYSTEM PARADIGM is an office furniture system that uses panels to help create workstations. Its well-thought-out, sleek components make it possible to create as wide a variety of stimulating work environments as one can imagine. Robust and modular, the system is easily reconfigurable to suit the evolving needs of the business and its users. PARADIGM’s finishes can be selected to create a harmonious look with the numerous other collections of office furniture and metal storage units offered by Groupe Lacasse. GENERAL INFORMATION Here is how to specify a work environment Ratings 1. Divide the open area into workstations using the panels and their components. 2. Determine each user’s electrical requirements. 3. Specify the surfaces and supports/legs based on the desired ergonomics of each workstation. 4. Specify the storage units according to user needs. 5. Complete the workstations with accessories. 6. Add chairs or upholstered furniture from our United Chair and Arold brands. Fire rating • Class A fire rating. BIFMA rating • PARADIGM meets or exceeds the standards set by ANSI/BIFMA. Electrical rating • Electrical components are UL183 listed and certified for use in Canada and the United States. • Electrical components are cUL listed. • They meet the requirements of articles 604 and 605 of the National Electric Code (NEC/CSA /CE). Work surface Laminate gallery end panel Low storage module Panel Storage module underneath the surface Cushion Base

SPECIFICATIONS 4 PARADIGM Panel System USA – FEBRUARY 2025 Laminate panel PANELS AND COMPONENTS Panel construction – external view Panel construction – internal view What a panel includes • Imperial and metric dimensions are exact. • Panels with a fabric finish can be used as tackboards. • Raceway covers, side rails, trims and top caps are made of painted aluminum. • 1⁄ 4" (6 mm) tempered glass with clear or frosted finish. Example: KPMA-6636-3P * A ratio has been established to ensure that each order comes with a sufficient number of components to allow an optimal configuration while avoiding wastefulness. ** Components included with a powered panel. 1 Panel width is measured from center line to center line of the in-line junction connectors. Panels are available in 24" (610 mm), 30" (762 mm), 36" (914 mm), 42" (1067 mm), 48" (1219 mm) and 60" (1524 mm) widths. 2 Panel height is measured from the leveler (minimum position) to the top trim. A leveler can make an adjustment of up to 2" (51 mm). Panels are available in 297⁄ 8" (758 mm), 421⁄ 4" (1072 mm), 483⁄ 8" (1229 mm), 545⁄ 8" (1386 mm) and 667⁄ 8" (1700 mm) heights. 3 Panel thickness is 2" (51 mm). 4 Panels are equipped with side rails to accept work surfaces, storage modules and accessories. 5 The raceway is 5" (125 mm) high. 1 2 3 4 5 Fabric High-pressure laminate sheet Fiberglass pad Rigid substrate Aluminum frame Aluminum frame Honeycomb cardboard core Honeycomb cardboard core # Components Qty 1 Side rails 2 2 Top trim 1 3 Junction cap 0.6* 4 Raceway covers 2 5 Glides 2 6 Alignment systems 2 7 In-line junction connector 1.6* 8 Electrical system** 1 9 Electrical connector** 0.6* 1 7 2 3 5 4 8 6 9 Fabric acoustical panel

SPECIFICATIONS 5 PARADIGM Panel System USA – FEBRUARY 2025 PANELS AND COMPONENTS (cont’d) Stackable panels Panel dimensional range • Stackable panels can be used to increase panel height if necessary during a reconfiguration. • A stackable panel can be installed over a monolithic* or segmented panel. • A stackable panel cannot be installed over a glass segmented panel. • Total panel height, including stackable panels, cannot exceed 667/ 8" (1700 mm). • A maximum of 2 stackable panels can be used. Their combined height cannot exceed the height of the base panel. • A glass stackable panel cannot accept any other stackable component. • A stackable panel cannot support any storage unit or accessory. 48" (1219 mm) monolithic panels can accept stackable panels. However, the height of the end-of-run trim and the junction kits must be cut at the installation job site. * • Segmented panels are factory-assembled. • Different finishes can be applied on each side of a panel. Refer to the codification table (see page 17). • A segmented panel can have only one glass segment, always positioned on the upper portion. • The glass segment cannot support a storage unit or an accessory. 667⁄ 8" H (1700 mm) 545⁄ 8" H (1386 mm) 483⁄ 8" H (1229 mm) 421⁄ 4" H (1072 mm) 297⁄ 8" H (758 mm) Upper segment 123/ 8" (314 mm) or 243/ 4" (628 mm) Middle segment 123/ 8" (314 mm) Base Some combinations are not available as a standard order. Contact the Special Orders department at special@groupelacasse.com. Available finishes: Fabric, laminate or combined Available finishes: Fabric, laminate, glass or combined Available finishes: Fabric or laminate Available finishes: Fabric, laminate or glass Monolithic panel Segmented panels

SPECIFICATIONS 6 PARADIGM Panel System USA – FEBRUARY 2025 PANELS AND COMPONENTS (cont’d) Glass privacy screens for panels 61/ 8" (157 mm) 123/ 8" (314 mm) 667/ 8" H (1700 mm) 545/ 8" H (1386 mm) 603/ 4" H (1543 mm) 483/ 8" H (1229 mm) 421/ 4" H (1072 mm) 297/ 8" H (758 mm) 36" H (914 mm) 73" H (1857 mm) 791/ 4" H (2014 mm) • Glass privacy screens for panels are sold with top trim. • Available heights are 61/ 8" (157 mm) and 123/ 8" (314 mm) and enable a visual alignment with the panels. • The screens can be installed on monolithic, segmented or stackable panels. • A privacy screen can be installed on a panel up to 667/ 8" (1700 mm) high to reach a total height of 791/ 4" (2014 mm). • Tempered glass privacy screens are available with clear or frosted glass 1/ 4" (6 mm) thick. • Glass privacy screens cannot be installed on top of glass segments or glass stackable panels. 1/ 2" (12 mm) 7/ 8" (22 mm) Junction connector applications Wall starter attachment • Junction connectors are used to connect panels of identical or variable height. • Junction connectors are black and are used as continuous vertical barriers between panels in order to block light. • In-line junction connectors are included with the panels (refer to pages 17 to 24). • 90-degree junction connectors are included in junction kits (refer to pages 27 and 28). • The wall starter is fastened in-line on the side rail using junction connectors. The footprint is thereby increased by 5/ 16" (8 mm). In-line junction L-junction T-junction X-junction Wall starter junction In-line junction connector 90-degree junction connector Optional alignment hardware is available to align the top of the glass privacy screens in a straight line application.

SPECIFICATIONS 7 PARADIGM Panel System USA – FEBRUARY 2025 PANELS AND COMPONENTS (cont’d) End-of-run trim Full-height junction kits • For standard configurations, junction kits have been designed to facilitate specification. These kits include all the components necessary to achieve the arrangements shown below. • To give the panel a finished look, it is necessary to specify an end-of-run trim. End-of-run trim Variable height end-of-run trim L-junction kit T-junction kit X-junction kit Caps required for center-mounted hutches and transaction countertops Variable-height junction kits • A selection of caps is available to achieve a continuous, elegant look. Certain configurations with center-mounted hutches or transaction countertops will require ordering additional top caps with the appropriate junction kit. The arrangements below may also be achieved with transaction countertops. KVCP-TS in-line junction KVCP-LA junction KVCP-TA junction L-junction kit T-junction kit -Type A T-junction kit -Type B T-junction kit -Type C T-junction kit -Type D X-junction kit -Type A T-junction kit -Type B KVCP-LAT junction

SPECIFICATIONS 8 PARADIGM Panel System USA – FEBRUARY 2025 PANELS AND COMPONENTS (cont’d) Raceway covers • 2 raceway covers are included with a panel. • Raceway covers can be ordered separately in order to create personalized configurations. • The communication plate can be knocked out and is slightly off-center to enable back-toback use of communication plates. • Covers for electrical and communication cut-outs are available for unused cut-outs. No cut-outs (N) 36, 42, 48, 60" (914, 1067, 1219, 1524 mm): 2 cut-outs for receptacle and 1 knock-out communication plate Cut-out for receptacle and communication plate Cut-out for junction box 36, 42, 48, 60" (914, 1067, 1219, 1524 mm): 1 cut-out for junction box and 1 knock-out communication plate 24" (610 mm: 1 cut-out for receptacle and 1 knock-out communication plate 24" (610 mm): 1 cut-out for junction box 30" (762 mm): 2 cut-outs for receptacles and 1 knock-out communication plate 30" (762 mm): 1 cut-out for junction box and 1 knock-out communication plate With cut-outs (P) With Chicago-type cut-outs (H) 13/ 32" H (10 mm) 113/ 32" (35 mm) 25/ 16" (58 mm) 12" (305 mm) 12" (305 mm) 211/ 16" (69 mm) 43/ 32" (104 mm) 33/ 32" (78 mm) 12" (305 mm) 12" (305 mm) 12" (305 mm) 12" (305 mm) Knock-out communication plate on 30" (762 mm) and greater panel Knock-out communication plate Electrical cut-outs for junction boxes (refer to page 30) Back-to-back use is impossible Electrical cut-out for receptacle Positioning of type P cut-outs Dimensions of cut-outs Dimensions of type H cut-outs Positioning of type H cut-outs

SPECIFICATIONS 9 PARADIGM Panel System USA – FEBRUARY 2025 ELECTRIFICATION AND CABLE MANAGEMENT Here are the 4 steps in order to provide electric power to a workstation 1. Define the electrical system required, according to needs and the number of users. STEP 1: Define the electrical system required as a function of needs and the number of users. STEP 2: Determine the power infeed. STEP 3: Specify the number of electrical receptacles and connectors. STEP 4: Complete a workstation set-up with accessories. The choice of electrical system is based on the number of electrical and electronic devices to be plugged in at each workstation. An electrician is qualified to determine the power (amperage) used simultaneously and to recommend the best electrical system and the number of power sources required. The two electrical systems available connect only to 120 Volt / 60 Hertz power sources. Note: If the devices are in continuous use for more than 3 hours, as computers, lamps and screens generally are, it is recommended that the circuits be used at only 80% of their capacity. 3-circuit, 5-wire electrical system The 3 circuits are common and share the same neutral wire and the same ground wire. This modular system includes: • 3 hot wires in 12-gauge copper. • 1 common neutral wire in 10-gauge copper. • 1 common ground wire in 12-gauge copper. Compatible with single-phase and three-phase currents, respectively 240 / 120V, 208 / 120V. Based on the Canadian Electrical Code (CE Code) / National Electric Code (NEC): United States: 20-amp circuit. • 13 receptacles and a maximum of 15 amps per circuit, for a total of 39 receptacles per power source (total capacity of 60 Amps). Canada: 15-amp circuit. • Maximum of 10 receptacles per circuit, for a total of 30 receptacles per power source (total capacity of 45 Amps). If necessary or based on your needs, a 1+1 system is also available. Contact Customer Service for full details. Compatible with single-phase and triple-phase currents, respectively 240 / 120V, 208 / 120V. Based on the Canadian Electrical Code (CE Code) / National Electric Code (NEC): United States: 20-amp circuit. • 13 receptacles and a maximum of 15 amps per circuit, for a total of 52 receptacles per power source (total capacity of 80 Amps). Canada: 15-amp circuit. • Maximum of 10 receptacles per circuit, for a total of 40 receptacles per power source (total capacity of 60 Amps). If necessary or based on your needs, a 2+2 system is also available. Contact Customer Service for full details. 4-circuit, 8-wire electrical system The 4th circuit is isolated and dedicated. It has its own neutral wire and ground wire. This modular system includes: • 4 hot wires in 12-gauge copper. • 1 common neutral wire in 10-gauge copper. • 1 dedicated neutral wire in 12-gauge copper. • 2 ground wires in 12-gauge copper. Rectangular surface with cable drop, clearance at back Standard rectangular surface Grommet mounted receptacle Power infeed Pass-thru jumper cable Lamp with USB charging port Duplex receptacle 3-circuit powered panel Surface mounted module Non-powered panel Circuit 1 Circuit 2 Circuit 3 Circuit 4 N2 N1 ISO G G H4 H3 H2 H1 Circuit 1 H1 N G H2 H3 Circuit 2 Circuit 3 Important: The electrical components for a 3-circuit, 5-wire system differ from those for a 4-circuit, 8-wire system. These components are not interchangeable from one system to the other. Accordingly, special attention is required during specification. Take note of whether the product code includes the digit ‘3’ or ‘4’. 1 3 4 3 2

SPECIFICATIONS 10 PARADIGM Panel System USA – FEBRUARY 2025 ELECTRIFICATION AND CABLE MANAGEMENT (cont’d) 2. Determine the power infeed. 3. Specify the number of electrical receptacles and connectors. Floor feed 3 types of base feed are available. • The infeed plugs into the receptacle location. • The plug protrudes by 11/ 2" (38 mm). Connectors for electrified junctions Each powered panel comes with a power connector that enables in-line panel-to-panel connections. Powered panels separated by a junction kit or a laminate gallery end panel require additional connectors. I Circuit #1 II Circuit #2 III Circuit #3 ▲ Circuit #4 isolated and dedicated Pass-thru jumper cables for non-powered panels When planning workstations requiring the passage of power cables through one or several non-powered panel(s), it is possible to order pass-thru jumper cables according to the electrical system chosen. Duplex receptacles • Each receptacle is comprised of 2 electric outlets. • Receptacles connect to the electrical system in a tool-free installation. • Receptacles are identified by circuit: 1 to 3, or 1 to 4, according to the electrical system chosen. • The triangle indicates that the circuit is isolated and dedicated (4-circuit system only). • If you are not sure what your needs are, we suggest ordering equal quantities of the receptacles for each of the circuits: C1-C2-C3-D4. Ceiling feed • The pole with electrification is equipped with a 168" (4267 mm) flexible metal conduit suitable for installation with ceilings 144" (3657 mm) high. • The 144" (3657 mm) tall pole is used at a panel end. • The 114" (2895 mm) tall pole is used in an LTX configuration. • For a configuration at a panel end, the footprint increases by 2" (51 mm). • The pole makes it possible to separate the electrical wires from the communication cables. • The pole comes with mounting hardware for drop ceilings, for a safe installation. Hardwire base feed • Plugs into the receptacle location. • Equipped with a 72" (1829 mm) liquid tight conduit. • Plugs into a receptacle. • Equipped with a 24" (610 mm) cord. • Powers circuit No. 1 only • UL Recognized, cUL Approved. • The installation of a concealed base feed requires a non-powered panel. • Equipped with a 72" (1829 mm) flexible metal conduit. • Meets the standards of the New York City Building Code. • A Type P cover can be ordered. 20-amp plug-in base feed Concealed base feed G-connection L-connection S-connection T-connection X-connection Panel-to-panel connection (included with powered panel) 2" (51 mm) Pole

SPECIFICATIONS 11 PARADIGM Panel System USA – FEBRUARY 2025 ELECTRIFICATION AND CABLE MANAGEMENT (cont’d) Cable capacity* 4. Complete the workstation set-up with accessories. Accessories for cable management Cable and power management beneath the work surfaces can be done with various components: Surface electrification Receptacles for work surfaces are available in order to have more electrical access points. Fastener for cable management (horizontal) • Holds cables together beneath the work surface, for cable management. Vertical wire cover • Enables cable management from the work surface to the floor. • 2" (51 mm) diameter. • With zipper. • Black fabric. The pole and raceways have a cable capacity that varies with the cable category used. Category 5e (cable with 0,20" (5 mm) diameter). Category 6 (cable with 0,25" (6,35 mm) diameter). 60% capacity 40% capacity Cable capacity with a 4-circuit system Cat. 5e Cat. 6 Cat. 5e Cat. 6 Powered raceway 26 18 18 12 Powered pole 44 28 29 18 60% capacity 40% capacity Cable capacity with a 3-circuit system Cat. 5e Cat. 6 Cat. 5e Cat. 6 Powered raceway 34 21 23 14 Powered pole 44 28 29 18 60% capacity 40% capacity Cable capacity with no electrical system Cat. 5e Cat. 6 Cat. 5e Cat. 6 Non-powered raceway 62 50 41 33 Communication pole 44 28 29 18 For information purposes only. Actual cable capacity may vary according to the type of set-up and the electric modules used. * Communication pole 100% 60% 40% Installed at the same time as the work surface. Compatible with work surfaces with or without cable drop clearance. Office lamp with USB charging port. Installed in the location of a grommet. Non-powered raceway 100% 60% 40%

SPECIFICATIONS 12 PARADIGM Panel System USA – FEBRUARY 2025 LAMINATE GALLERY PANELS Glass privacy screens 545⁄ 8" H (1386 mm) 483⁄ 8" H (1229 mm) 421⁄ 4" H (1072 mm) 297⁄ 8" H (758 mm) 36" H (914 mm) 123/ 8" (314 mm) 61/ 8" (157 mm) 7/ 8" (22 mm) 7/ 8" (22 mm) 7/ 8" (22 mm) 2" (51 mm) 2" (51 mm) Single gallery panels Single end-of-run panels Shared end-of-run panels Single intersection panels Shared intersection panels Fastening to a surface is possible with the corner braces included Shared gallery panels Characteristics of laminate gallery panels • Gallery panels provide full or partial privacy when one is seated. • They must be fastened to a monolithic or segmented panel of the same height or taller. • A cut-out at the bottom of the laminate intersection panel makes it possible to pass power cables between two monolithic or segmented panels (refer to page 10). • Gallery panel length includes 2" (51 mm) panel thickness. • L-bracket included for fastening the front corner of a work surface to the gallery panel. • Tempered glass privacy screens are available in clear or frosted glass 1⁄ 4" (6 mm) thick. WORK SURFACES General characteristics • Work surfaces are made of particleboard panels finished on both sides, in marresistant thermofused laminate (45 lb/ft3) 1" (25 mm) thick, also known as “highperformance laminate.” • High-pressure laminate work surfaces are also available. Add 1/ 16" (1,5 mm) to the thickness of the work surface. • All work surfaces are finished with ABS edgebanding in matching color. • Work surfaces 23" (585 mm) in width or more can accept a keyboard tray. • Monitor screen supports may be installed in a grommet location or on work surfaces that have a cable drop clearance. • Work surfaces have metal-to-metal fittings so as to maintain product integrity during the installation or rearrangement of the cantilever supports. Grommets and cable management • Work surfaces may be ordered with or without grommets. • Rectangular and corner work surfaces are also available with a 1" (25,5 mm) cable drop clearance. • Grommets are positioned at various locations on the work surface (refer to illustration on next page). • The plastic grommet is rectangular and silver colored.

SPECIFICATIONS 13 PARADIGM Panel System USA – FEBRUARY 2025 SUPPORTS AND BASES Supports Configuration of brackets Without grommets • Supports are sold separately from work surfaces, with the exception of transaction countertops. • Supports are coated with durable electrostatic paint. Cantilever supports • Left or right cantilever supports (sold as a pair) are fastened to the ends of a work surface. • A third cantilever support, left or right, is required when the surface width exceeds 60" (1524 mm). • They support work surfaces of all depths. • They are compatible with work surfaces that have a cable drop clearance. • Shared cantilever supports are installed between 2 work surfaces. • They are made of 14-gauge steel and equipped with an anti-dislodgement device. Corner or end brackets • Corner or end brackets support the back of a corner work surface. • They support the front of a work surface in order to stabilize a return panel. • They support a rectangular or trapezoidal conference work surface whose width is identical to that of the panel. • They support a 24" (610 mm) lower shelf of a suspended storage with drop-down door, when the lower shelf is installed on a panel of the same width. • They support the back of a work surface when a fixed pedestal is installed. • They are compatible with work surfaces that have a cable drop clearance. • They are made of 14-gauge steel and equipped with an anti-dislodgement device. Flat bracket • Flat brackets make it possible to set up a conference work surface with another work surface. Reinforcement bars • A reinforcement bar is recommended for any work surface when the distance between 2 cantilevers is 48" to 60" (1219 to 1524 mm). • A reinforcement bar is not a replacement for a support. • The reinforcement bar supports the 24" (610 mm) lower shelf of a suspended storage with drop-down door when the lower shelf is installed on a panel with a different width. With cable drop clearance at back With cable drop clearance at back and on 1 side With cable drop clearance at both backs With grommets WORK SURFACES (cont’d) 54" and - (1372 mm and -) 60" and + (1524 mm and +) Cantilever supports Reinforcement bar Flat bracket Corner or end bracket Shared cantilever support Corner or end bracket Corner or end bracket Shared cantilever support Cantilever support Corner or end bracket Corner or end bracket Reinforcement bar Cantilever support Shared cantilever support Flat bracket

SPECIFICATIONS 14 PARADIGM Panel System USA – FEBRUARY 2025 SUPPORTS AND BASES (cont’d) End frame for panel Different types of bases can be attached to a panel and are used to support a work surface at one end. • 4 models available. • P-metal and laminate bases allow a vertical adjustment of the panel of 11/ 2" (38 mm). • No adjustment is possible with the intermediate P-metal base used with a low storage unit. Leg / frame for surface Different types of leg / frame make it possible to support work surfaces at their end. • 5 models are available. • A and O-metal frames allow a vertical adjustment of 11/ 2" (38 mm). • An I-leg allows a vertical adjustment of 11/ 4" (32 mm). • An I-leg with a conference base allows a vertical adjustment of 1/ 8" (3 mm). • No adjustment is possible with an intermediate A-metal leg used with a low storage unit. Ped-to-panel attachment filler • Enables a full-height finish behind a modular metal pedestal. • Available for surfaces 20" (508 mm) and 24" (610 mm) deep, according to the depth of the pedestal. P-end frame A-frame O-frame I-leg I-leg with conference base Laminate end panel Intermediate P‑end frame Ped-to-panel attachment filler Configuration of supports A-frame Intermediate A‑frame Intermediate P‑end frame Laminate end panel I-leg I-leg with conference base Ped-to-panel attachment filler O-frame P-end frame

SPECIFICATIONS 15 PARADIGM Panel System USA – FEBRUARY 2025 METAL STORAGE FURNITURE LAMINATE STORAGE FURNITURE General characteristics: • Personal storage towers, wardrobes, storage units with lateral opening compartment and low storage units are freestanding and can be used alone. • Levelers installed on laminate storage furniture allow a vertical adjustment of 11/ 2" (38 mm). • Face panels and doors cover the outer sides, the top, the base and the inset back. They provide an impeccable finish and solidity. • All laminate storage units are equipped with a standard lock and 2 keys per lock. All locks are easily changed at the installation job site. It is possible to change the cylinders and to install a single-key system. A master key and control key are also available. Contact Customer Service for full details. • Center-mounted hutches are installed to the top of a panel with 2 supports, supplied. • They are held securely in place with an anti-dislodgement device. • A top cap is necessary, depending on the configuration (refer to page 7). • They are installed on panels having a maximum height of 545/ 8" (1386 mm). • They cannot be installed on a stackable panel or on a segmented panel with glass. • A suspension bar is included in each file drawer. • Metal front with full-width metal handles matching pedestal color. • Optional laminate front with handles. • Modular pedestals must be installed beneath a 29" (737 mm) work surface and combined with a corner or end support or a ped-to-panel attachment filler. • Personal mobile storage units include a hidden drawer, an accessible compartment on the left or right or a file drawer. • Cushions are available for the mobile pedestal and the personal mobile storage units. • Metal storage furniture is equipped with levelers or casters and comes assembled and ready to use. • The levelers installed on metal storage furniture allow a vertical adjustment of 11/ 4" (32 mm). • All metal storage furniture is equipped with a standard lock and 2 keys per lock. All locks are easily changed at the installation job site. It is possible to change the cylinders and to install a single-key system. A master key and control key are also available. Contact Customer Service for full details. • Metal storage units can fit into one another. • Laminate shelf available as an option. • They must be installed beneath a work surface. • Metal storage units can also be installed beneath an adjustable table. Contact our Special Orders department at special@groupelacasse.com. Modular pedestal Single Double Single + double Open center-mounted hutch 127/ 8" (328 mm) with glass privacy screen 127/ 8" (328 mm) with monolithic or segmented panel 127/ 8" (328 mm) with laminate gallery panel 15" (381 mm) with glass privacy screen 15" (381 mm) with monolithic or segmented panel 15" (381 mm) with laminate gallery panel Center-mounted hutch with sliding door Mobile pedestal Personal mobile storage unit Center-mounted hutches Height management Storage units Hanging personal storage compartments

SPECIFICATIONS 16 PARADIGM Panel System USA – FEBRUARY 2025 LAMINATE STORAGE FURNITURE (cont’d) Suspended storage unit with drop-down door Storage modules • Assisted-opening, drop-down door. • Available with choice of top or bottom shelves, for optimal set-ups in small spaces. • Cantilevered shelves available in 12" (305 mm) or 24" (610 mm) widths. • Suspended storage unit with a top shelf must be fastened to a work surface using the hardware included. • We recommend not installing a work surface or a suspended storage unit with drop-down door at a height exceeding 42" (1067 mm). • Suspended storage unit is secured in place by an anti-dislodgement device. • The supports are located at the rear of the suspended storage unit, which must be installed on a panel of equal width, not including the width of the cantilevered shelf. • For a suspended storage unit with drop-down door and a bottom shelf, a supplemental bracket must be ordered separately separately to reinforce the shelf (refer to page 13). • Warning: Suspended storage units cannot be used as a seat under any circumstances. • Fixed storage modules must be combined with a corner or end support in order to properly support the work surface. • Personal storage towers, wardrobes, and storage units with lateral opening compartment may be fastened to a surface with the brackets included. • The storage unit with lateral opening compartment has two functions: it can divide a space and be used for personal storage. • Low storage modules can be used with an intermediate base to support a work surface. • Cushions are available for low storage modules. Suspended storage unit with drop-down door Suspended storage unit with drop-down door and upper shelf Modular lateral file Personal storage tower Wardrobe Storage unit with lateral opening compartment Low storage module Suspended storage unit with drop-down door and lower shelf

PANELS AND PANEL COMPONENTS MONOLITHIC, SEGMENTED, STACKABLE PANELS AND PRIVACY SCREENS EXAMPLE: KPQLAG-6636-3P-P53-SNO-FOS-CD9-CD9-CG A B A B Fabric orientation: refer to swatch cards. CODIFICATION Series Type of product Finish Panel dimension Electrification Finishes Trim color Panel base Middle segment Upper segment Glass K PM Monolithic panel PQ Segmented panel 123/ 8" (314 mm) PH Segmented panel 243/ 4" (628 mm) PS Stackable panel PF Privacy screen A Fabric L HPL C Combined G Glass NN Non-powered 3P 3-circuit powered 4P 4-circuit powered P53 Snow P44 Metallic Silver P04 Charcoal Side A Side B Side A Side B Side A Side B CG Clear TG Frosted LAMINATE GALLERY PANELS EXAMPLE: KPLESG-4238-12-L-P53-FOS-CG CODIFICATION Series Type of product Application Type Option Panel dimension Glass height Orientation Finishes Trim color Laminate Glass K PL Laminate gallery panel E End-of-run M Intersection S Single D Shared G Glass NN None 06 61/ 8" (157 mm) 12 123/ 8" (314 mm) L Left R Right P53 Snow P44 Metallic Silver P04 Charcoal CG Clear TG Frosted W x D x H (in) W x D x H (mm) Code Gr1 ($) Gr2 ($) Gr3 ($) W x D x H (in) W x D x H (mm) Code Gr1 ($) Gr2 ($) Gr3 ($) MONOLITHIC PANELS Fabric acoustical panels, non-powered A combination of upholsteries may be applied to each side of a panel. If they are of different grades, the cost of the upholstery will be based on the price of the higher grade. Panel includes in-line junction connectors, top trim and 2 covers with no cut-outs for the raceway. 24 x 2 x 297/8 610 x 51 x 758 KPMA-3024-NN-___ 578 649 731 30 x 2 x 297/8 762 x 51 x 758 KPMA-3030-NN-___ 636 706 788 36 x 2 x 297/8 914 x 51 x 758 KPMA-3036-NN-___ 700 769 853 42 x 2 x 297/8 1067 x 51 x 758 KPMA-3042-NN-___ 769 839 921 48 x 2 x 297/8 1219 x 51 x 758 KPMA-3048-NN-___ 846 916 998 60 x 2 x 297/8 1524 x 51 x 758 KPMA-3060-NN-___ 972 1,043 1,125 24 x 2 x 421/4 610 x 51 x 1072 KPMA-4224-NN-___ 624 694 777 30 x 2 x 421/4 762 x 51 x 1072 KPMA-4230-NN-___ 694 763 846 36 x 2 x 421/4 914 x 51 x 1072 KPMA-4236-NN-___ 757 828 910 42 x 2 x 421/4 1067 x 51 x 1072 KPMA-4242-NN-___ 834 904 986 48 x 2 x 421/4 1219 x 51 x 1072 KPMA-4248-NN-___ 916 986 1,069 60 x 2 x 421/4 1524 x 51 x 1072 KPMA-4260-NN-___ 1,057 1,125 1,210 24 x 2 x 483/8 610 x 51 x 1229 KPMA-4824-NN-___ 655 726 808 30 x 2 x 483/8 762 x 51 x 1229 KPMA-4830-NN-___ 719 788 870 36 x 2 x 483/8 914 x 51 x 1229 KPMA-4836-NN-___ 795 865 947 42 x 2 x 483/8 1067 x 51 x 1229 KPMA-4842-NN-___ 870 941 1,023 48 x 2 x 483/8 1219 x 51 x 1229 KPMA-4848-NN-___ 955 1,023 1,108 60 x 2 x 483/8 1524 x 51 x 1229 KPMA-4860-NN-___ 1,100 1,170 1,252 24 x 2 x 545/8 610 x 51 x 1386 KPMA-5424-NN-___ 706 777 859 30 x 2 x 545/8 762 x 51 x 1386 KPMA-5430-NN-___ 777 846 929 36 x 2 x 545/8 914 x 51 x 1386 KPMA-5436-NN-___ 859 929 1,011 42 x 2 x 545/8 1067 x 51 x 1386 KPMA-5442-NN-___ 941 1,011 1,093 48 x 2 x 545/8 1219 x 51 x 1386 KPMA-5448-NN-___ 1,031 1,100 1,184 60 x 2 x 545/8 1524 x 51 x 1386 KPMA-5460-NN-___ 1,184 1,252 1,335 24 x 2 x 667/8 610 x 51 x 1700 KPMA-6624-NN-___ 757 828 910 30 x 2 x 667/8 762 x 51 x 1700 KPMA-6630-NN-___ 834 904 986 36 x 2 x 667/8 914 x 51 x 1700 KPMA-6636-NN-___ 916 986 1,069 42 x 2 x 667/8 1067 x 51 x 1700 KPMA-6642-NN-___ 1,011 1,082 1,164 48 x 2 x 667/8 1219 x 51 x 1700 KPMA-6648-NN-___ 1,113 1,184 1,266 60 x 2 x 667/8 1524 x 51 x 1700 KPMA-6660-NN-___ 1,272 1,343 1,425 At the end of the product code add, in this order: trim color, upholstery for sides A/B. Fabric acoustical panels, powered A combination of upholsteries may be applied to each side of a panel. If they are of different grades, the cost of the upholstery will be based on the price of the higher grade. Panel includes in-line junction connectors, top trim, 2 covers with cut-outs and knock-out communication plates for the raceway, the electric system, and the in-line power connector. To be ordered separately: duplex receptacles KER_-_ _-_; refer to pages 29 and 30. 24 x 2 x 297/8 610 x 51 x 758 KPMA-3024-_P-___ 712 783 865 30 x 2 x 297/8 762 x 51 x 758 KPMA-3030-_P-___ 802 870 955 36 x 2 x 297/8 914 x 51 x 758 KPMA-3036-_P-___ 885 955 1,037 42 x 2 x 297/8 1067 x 51 x 758 KPMA-3042-_P-___ 955 1,023 1,108 48 x 2 x 297/8 1219 x 51 x 758 KPMA-3048-_P-___ 1,043 1,113 1,195 60 x 2 x 297/8 1524 x 51 x 758 KPMA-3060-_P-___ 1,227 1,298 1,380 24 x 2 x 421/4 610 x 51 x 1072 KPMA-4224-_P-___ 763 834 916 30 x 2 x 421/4 762 x 51 x 1072 KPMA-4230-_P-___ 859 929 1,011 36 x 2 x 421/4 914 x 51 x 1072 KPMA-4236-_P-___ 947 1,018 1,100 42 x 2 x 421/4 1067 x 51 x 1072 KPMA-4242-_P-___ 1,023 1,093 1,177 48 x 2 x 421/4 1219 x 51 x 1072 KPMA-4248-_P-___ 1,113 1,184 1,266 60 x 2 x 421/4 1524 x 51 x 1072 KPMA-4260-_P-___ 1,317 1,386 1,470 24 x 2 x 483/8 610 x 51 x 1229 KPMA-4824-_P-___ 788 859 941 30 x 2 x 483/8 762 x 51 x 1229 KPMA-4830-_P-___ 890 961 1,043 36 x 2 x 483/8 914 x 51 x 1229 KPMA-4836-_P-___ 980 1,049 1,133 42 x 2 x 483/8 1067 x 51 x 1229 KPMA-4842-_P-___ 1,057 1,125 1,210 48 x 2 x 483/8 1219 x 51 x 1229 KPMA-4848-_P-___ 1,151 1,221 1,303 60 x 2 x 483/8 1524 x 51 x 1229 KPMA-4860-_P-___ 1,354 1,425 1,507 24 x 2 x 545/8 610 x 51 x 1386 KPMA-5424-_P-___ 839 910 992 30 x 2 x 545/8 762 x 51 x 1386 KPMA-5430-_P-___ 947 1,018 1,100 36 x 2 x 545/8 914 x 51 x 1386 KPMA-5436-_P-___ 1,043 1,113 1,195 42 x 2 x 545/8 1067 x 51 x 1386 KPMA-5442-_P-___ 1,133 1,201 1,285 48 x 2 x 545/8 1219 x 51 x 1386 KPMA-5448-_P-___ 1,227 1,298 1,380 60 x 2 x 545/8 1524 x 51 x 1386 KPMA-5460-_P-___ 1,444 1,514 1,596 24 x 2 x 667/8 610 x 51 x 1700 KPMA-6624-_P-___ 896 967 1,049 30 x 2 x 667/8 762 x 51 x 1700 KPMA-6630-_P-___ 1,006 1,074 1,159 36 x 2 x 667/8 914 x 51 x 1700 KPMA-6636-_P-___ 1,108 1,177 1,260 42 x 2 x 667/8 1067 x 51 x 1700 KPMA-6642-_P-___ 1,201 1,272 1,354 48 x 2 x 667/8 1219 x 51 x 1700 KPMA-6648-_P-___ 1,303 1,374 1,456 60 x 2 x 667/8 1524 x 51 x 1700 KPMA-6660-_P-___ 1,533 1,603 1,685 Specify 3-circuit or 4-circuit system (surcharge of $140 for 4-circuit). At the end of the product code add, in this order: trim color, upholstery for sides A/B. B A A B A B A A B A B B 17 PARADIGM Panel System USA – FEBRUARY 2025 PARADIGM Panel System

W x D x H (in) W x D x H (mm) Code Price ($) W x D x H (in) W x D x H (mm) Code Gr1 ($) Gr2 ($) Gr3 ($) Laminate panels, non‑powered A combination of HPL finishes may be applied to each side of a panel. Panel includes in-line junction connectors, top trim and 2 covers with no cut-outs for raceway. 24 x 2 x 297/8 610 x 51 x 758 KPML-3024-NN-___ 980 30 x 2 x 297/8 762 x 51 x 758 KPML-3030-NN-___ 1,026 36 x 2 x 297/8 914 x 51 x 758 KPML-3036-NN-___ 1,073 42 x 2 x 297/8 1067 x 51 x 758 KPML-3042-NN-___ 1,225 48 x 2 x 297/8 1219 x 51 x 758 KPML-3048-NN-___ 1,273 24 x 2 x 421/4 610 x 51 x 1072 KPML-4224-NN-___ 1,113 30 x 2 x 421/4 762 x 51 x 1072 KPML-4230-NN-___ 1,160 36 x 2 x 421/4 914 x 51 x 1072 KPML-4236-NN-___ 1,207 42 x 2 x 421/4 1067 x 51 x 1072 KPML-4242-NN-___ 1,426 48 x 2 x 421/4 1219 x 51 x 1072 KPML-4248-NN-___ 1,473 24 x 2 x 483/8 610 x 51 x 1229 KPML-4824-NN-___ 1,180 30 x 2 x 483/8 762 x 51 x 1229 KPML-4830-NN-___ 1,225 36 x 2 x 483/8 914 x 51 x 1229 KPML-4836-NN-___ 1,279 42 x 2 x 483/8 1067 x 51 x 1229 KPML-4842-NN-___ 1,526 48 x 2 x 483/8 1219 x 51 x 1229 KPML-4848-NN-___ 1,572 24 x 2 x 545/8 610 x 51 x 1386 KPML-5424-NN-___ 1,246 30 x 2 x 545/8 762 x 51 x 1386 KPML-5430-NN-___ 1,300 36 x 2 x 545/8 914 x 51 x 1386 KPML-5436-NN-___ 1,346 42 x 2 x 545/8 1067 x 51 x 1386 KPML-5442-NN-___ 1,626 48 x 2 x 545/8 1219 x 51 x 1386 KPML-5448-NN-___ 1,673 24 x 2 x 667/8 610 x 51 x 1700 KPML-6624-NN-___ 1,279 30 x 2 x 667/8 762 x 51 x 1700 KPML-6630-NN-___ 1,326 36 x 2 x 667/8 914 x 51 x 1700 KPML-6636-NN-___ 1,373 42 x 2 x 667/8 1067 x 51 x 1700 KPML-6642-NN-___ 1,686 48 x 2 x 667/8 1219 x 51 x 1700 KPML-6648-NN-___ 1,733 At the end of the product code add, in this order: trim color, HPL finishes for sides A/B. Laminate panels, powered A combination of HPL finishes may be applied to each side of a panel. Panel includes in-line junction connectors, top trim, 2 covers with cut-outs and knock-out communication plates for the raceway, the electric system, and the in-line power connector. To be ordered separately: duplex receptacles KER_-_ _-_; refer to pages 29 and 30. 24 x 2 x 297/8 610 x 51 x 758 KPML-3024-_P-___ 1,119 30 x 2 x 297/8 762 x 51 x 758 KPML-3030-_P-___ 1,199 36 x 2 x 297/8 914 x 51 x 758 KPML-3036-_P-___ 1,266 42 x 2 x 297/8 1067 x 51 x 758 KPML-3042-_P-___ 1,421 48 x 2 x 297/8 1219 x 51 x 758 KPML-3048-_P-___ 1,480 24 x 2 x 421/4 610 x 51 x 1072 KPML-4224-_P-___ 1,252 30 x 2 x 421/4 762 x 51 x 1072 KPML-4230-_P-___ 1,332 36 x 2 x 421/4 914 x 51 x 1072 KPML-4236-_P-___ 1,400 42 x 2 x 421/4 1067 x 51 x 1072 KPML-4242-_P-___ 1,619 48 x 2 x 421/4 1219 x 51 x 1072 KPML-4248-_P-___ 1,679 24 x 2 x 483/8 610 x 51 x 1229 KPML-4824-_P-___ 1,320 30 x 2 x 483/8 762 x 51 x 1229 KPML-4830-_P-___ 1,400 36 x 2 x 483/8 914 x 51 x 1229 KPML-4836-_P-___ 1,473 42 x 2 x 483/8 1067 x 51 x 1229 KPML-4842-_P-___ 1,719 48 x 2 x 483/8 1219 x 51 x 1229 KPML-4848-_P-___ 1,779 24 x 2 x 545/8 610 x 51 x 1386 KPML-5424-_P-___ 1,385 30 x 2 x 545/8 762 x 51 x 1386 KPML-5430-_P-___ 1,473 36 x 2 x 545/8 914 x 51 x 1386 KPML-5436-_P-___ 1,540 42 x 2 x 545/8 1067 x 51 x 1386 KPML-5442-_P-___ 1,819 48 x 2 x 545/8 1219 x 51 x 1386 KPML-5448-_P-___ 1,878 24 x 2 x 667/8 610 x 51 x 1700 KPML-6624-_P-___ 1,421 30 x 2 x 667/8 762 x 51 x 1700 KPML-6630-_P-___ 1,500 36 x 2 x 667/8 914 x 51 x 1700 KPML-6636-_P-___ 1,566 42 x 2 x 667/8 1067 x 51 x 1700 KPML-6642-_P-___ 1,878 48 x 2 x 667/8 1219 x 51 x 1700 KPML-6648-_P-___ 1,940 Specify 3-circuit or 4-circuit system (surcharge of $140 for 4-circuit). At the end of the product code add, in this order: trim color, HPL finishes for sides A/B. Laminate/fabric combined panels, non‑powered Panel includes in-line junction connectors, top trim and 2 covers with no cut-outs for raceway. 24 x 2 x 297/8 610 x 51 x 758 KPMC-3024-NN-___ 885 921 967 30 x 2 x 297/8 762 x 51 x 758 KPMC-3030-NN-___ 941 980 1,023 36 x 2 x 297/8 914 x 51 x 758 KPMC-3036-NN-___ 992 1,031 1,074 42 x 2 x 297/8 1067 x 51 x 758 KPMC-3042-NN-___ 1,100 1,139 1,184 48 x 2 x 297/8 1219 x 51 x 758 KPMC-3048-NN-___ 1,151 1,190 1,234 24 x 2 x 421/4 610 x 51 x 1072 KPMC-4224-NN-___ 1,006 1,043 1,088 30 x 2 x 421/4 762 x 51 x 1072 KPMC-4230-NN-___ 1,062 1,100 1,144 36 x 2 x 421/4 914 x 51 x 1072 KPMC-4236-NN-___ 1,119 1,159 1,201 42 x 2 x 421/4 1067 x 51 x 1072 KPMC-4242-NN-___ 1,252 1,292 1,335 48 x 2 x 421/4 1219 x 51 x 1072 KPMC-4248-NN-___ 1,303 1,343 1,386 24 x 2 x 483/8 610 x 51 x 1229 KPMC-4824-NN-___ 1,069 1,108 1,151 30 x 2 x 483/8 762 x 51 x 1229 KPMC-4830-NN-___ 1,125 1,164 1,210 36 x 2 x 483/8 914 x 51 x 1229 KPMC-4836-NN-___ 1,177 1,215 1,260 42 x 2 x 483/8 1067 x 51 x 1229 KPMC-4842-NN-___ 1,329 1,368 1,412 48 x 2 x 483/8 1219 x 51 x 1229 KPMC-4848-NN-___ 1,380 1,419 1,463 24 x 2 x 545/8 610 x 51 x 1386 KPMC-5424-NN-___ 1,133 1,170 1,215 30 x 2 x 545/8 762 x 51 x 1386 KPMC-5430-NN-___ 1,184 1,221 1,266 36 x 2 x 545/8 914 x 51 x 1386 KPMC-5436-NN-___ 1,241 1,278 1,323 42 x 2 x 545/8 1067 x 51 x 1386 KPMC-5442-NN-___ 1,405 1,444 1,488 48 x 2 x 545/8 1219 x 51 x 1386 KPMC-5448-NN-___ 1,463 1,502 1,545 24 x 2 x 667/8 610 x 51 x 1700 KPMC-6624-NN-___ 1,252 1,292 1,335 30 x 2 x 667/8 762 x 51 x 1700 KPMC-6630-NN-___ 1,303 1,343 1,386 36 x 2 x 667/8 914 x 51 x 1700 KPMC-6636-NN-___ 1,361 1,400 1,444 42 x 2 x 667/8 1067 x 51 x 1700 KPMC-6642-NN-___ 1,558 1,596 1,642 48 x 2 x 667/8 1219 x 51 x 1700 KPMC-6648-NN-___ 1,616 1,654 1,698 At the end of the product code add, in this order: trim color, HPL finish for side A, upholstery for side B. Laminate/fabric combined panels, powered Panel includes in-line junction connectors, top trim, 2 covers with cut-outs and knock-out communication plates for the raceway, the electric system, and the in-line power connector. To be ordered separately: duplex receptacles KER_-_ _-_; refer to pages 29 and 30. 24 x 2 x 297/8 610 x 51 x 758 KPMC-3024-_P-___ 1,018 1,057 1,100 30 x 2 x 297/8 762 x 51 x 758 KPMC-3030-_P-___ 1,108 1,144 1,190 36 x 2 x 297/8 914 x 51 x 758 KPMC-3036-_P-___ 1,177 1,215 1,260 42 x 2 x 297/8 1067 x 51 x 758 KPMC-3042-_P-___ 1,285 1,323 1,368 48 x 2 x 297/8 1219 x 51 x 758 KPMC-3048-_P-___ 1,349 1,386 1,431 24 x 2 x 421/4 610 x 51 x 1072 KPMC-4224-_P-___ 1,139 1,177 1,221 30 x 2 x 421/4 762 x 51 x 1072 KPMC-4230-_P-___ 1,227 1,266 1,310 36 x 2 x 421/4 914 x 51 x 1072 KPMC-4236-_P-___ 1,303 1,343 1,386 42 x 2 x 421/4 1067 x 51 x 1072 KPMC-4242-_P-___ 1,437 1,476 1,520 48 x 2 x 421/4 1219 x 51 x 1072 KPMC-4248-_P-___ 1,502 1,540 1,584 24 x 2 x 483/8 610 x 51 x 1229 KPMC-4824-_P-___ 1,201 1,241 1,285 30 x 2 x 483/8 762 x 51 x 1229 KPMC-4830-_P-___ 1,292 1,329 1,374 36 x 2 x 483/8 914 x 51 x 1229 KPMC-4836-_P-___ 1,361 1,400 1,444 42 x 2 x 483/8 1067 x 51 x 1229 KPMC-4842-_P-___ 1,514 1,552 1,596 48 x 2 x 483/8 1219 x 51 x 1229 KPMC-4848-_P-___ 1,577 1,616 1,659 24 x 2 x 545/8 610 x 51 x 1386 KPMC-5424-_P-___ 1,266 1,303 1,349 30 x 2 x 545/8 762 x 51 x 1386 KPMC-5430-_P-___ 1,349 1,386 1,431 36 x 2 x 545/8 914 x 51 x 1386 KPMC-5436-_P-___ 1,425 1,463 1,507 42 x 2 x 545/8 1067 x 51 x 1386 KPMC-5442-_P-___ 1,591 1,628 1,673 48 x 2 x 545/8 1219 x 51 x 1386 KPMC-5448-_P-___ 1,659 1,698 1,743 24 x 2 x 667/8 610 x 51 x 1700 KPMC-6624-_P-___ 1,386 1,425 1,470 30 x 2 x 667/8 762 x 51 x 1700 KPMC-6630-_P-___ 1,470 1,507 1,552 36 x 2 x 667/8 914 x 51 x 1700 KPMC-6636-_P-___ 1,545 1,584 1,628 42 x 2 x 667/8 1067 x 51 x 1700 KPMC-6642-_P-___ 1,743 1,780 1,826 48 x 2 x 667/8 1219 x 51 x 1700 KPMC-6648-_P-___ 1,813 1,850 1,896 Specify 3-circuit or 4-circuit system (surcharge of $140 for 4-circuit). At the end of the product code add, in this order: trim color, HPL finish for side A, upholstery for side B. 18 PARADIGM Panel System USA – FEBRUARY 2025 PARADIGM Panel System

W x D x H (in) W x D x H (mm) Code Gr1 ($) Gr2 ($) Gr3 ($) W x D x H (in) W x D x H (mm) Code Price ($) SEGMENTED PANELS – 1 GLASS UPPER SEGMENT Fabric acoustical panels, 123/8" H glass segment, non-powered A combination of upholsteries may be applied to each side of a panel. If they are of different grades, the cost of the upholstery will be based on the price of the higher grade. Panel includes the tempered glass segment, in-line junction connectors, top trim and 2 covers with no cut-outs for raceway. 24 x 2 x 421/4 610 x 51 x 1072 KPQAG-4224-NN-___ 1,252 1,323 1,405 30 x 2 x 421/4 762 x 51 x 1072 KPQAG-4230-NN-___ 1,354 1,425 1,507 36 x 2 x 421/4 914 x 51 x 1072 KPQAG-4236-NN-___ 1,476 1,545 1,628 42 x 2 x 421/4 1067 x 51 x 1072 KPQAG-4242-NN-___ 1,596 1,667 1,749 48 x 2 x 421/4 1219 x 51 x 1072 KPQAG-4248-NN-___ 1,736 1,806 1,889 60 x 2 x 421/4 1524 x 51 x 1072 KPQAG-4260-NN-___ 1,958 2,029 2,111 24 x 2 x 545/8 610 x 51 x 1386 KPQAG-5424-NN-___ 1,303 1,374 1,456 30 x 2 x 545/8 762 x 51 x 1386 KPQAG-5430-NN-___ 1,412 1,482 1,565 36 x 2 x 545/8 914 x 51 x 1386 KPQAG-5436-NN-___ 1,533 1,603 1,685 42 x 2 x 545/8 1067 x 51 x 1386 KPQAG-5442-NN-___ 1,667 1,736 1,819 48 x 2 x 545/8 1219 x 51 x 1386 KPQAG-5448-NN-___ 1,806 1,876 1,958 60 x 2 x 545/8 1524 x 51 x 1386 KPQAG-5460-NN-___ 2,040 2,111 2,193 24 x 2 x 667/8 610 x 51 x 1700 KPQAG-6624-NN-___ 1,329 1,400 1,482 30 x 2 x 667/8 762 x 51 x 1700 KPQAG-6630-NN-___ 1,444 1,514 1,596 36 x 2 x 667/8 914 x 51 x 1700 KPQAG-6636-NN-___ 1,565 1,634 1,718 42 x 2 x 667/8 1067 x 51 x 1700 KPQAG-6642-NN-___ 1,698 1,768 1,850 48 x 2 x 667/8 1219 x 51 x 1700 KPQAG-6648-NN-___ 1,845 1,915 1,998 60 x 2 x 667/8 1524 x 51 x 1700 KPQAG-6660-NN-___ 2,086 2,157 2,239 At the end of the product code add, in this order: trim color, upholstery for sides A/B, clear (CG) or frosted (TG) finish for tempered glass (TG, surcharge of $63). Fabric acoustical panels, 123/8" H glass segment, powered A combination of upholsteries may be applied to each side of a panel. If they are of different grades, the cost of the upholstery will be based on the price of the higher grade. Panel includes the tempered glass segment, in-line junction connectors, top trim, 2 covers with cut-outs and knock-out communication plates for the raceway, the electric system and the in-line power connector. To be ordered separately: duplex receptacles KER_-_ _-_; refer to pages 29 and 30. 24 x 2 x 421/4 610 x 51 x 1072 KPQAG-4224-_P-___ 1,394 1,463 1,545 30 x 2 x 421/4 762 x 51 x 1072 KPQAG-4230-_P-___ 1,526 1,596 1,679 36 x 2 x 421/4 914 x 51 x 1072 KPQAG-4236-_P-___ 1,659 1,730 1,813 42 x 2 x 421/4 1067 x 51 x 1072 KPQAG-4242-_P-___ 1,787 1,857 1,940 48 x 2 x 421/4 1219 x 51 x 1072 KPQAG-4248-_P-___ 1,934 2,003 2,086 60 x 2 x 421/4 1524 x 51 x 1072 KPQAG-4260-_P-___ 2,219 2,290 2,372 24 x 2 x 545/8 610 x 51 x 1386 KPQAG-5424-_P-___ 1,437 1,507 1,591 30 x 2 x 545/8 762 x 51 x 1386 KPQAG-5430-_P-___ 1,577 1,647 1,730 36 x 2 x 545/8 914 x 51 x 1386 KPQAG-5436-_P-___ 1,718 1,787 1,870 42 x 2 x 545/8 1067 x 51 x 1386 KPQAG-5442-_P-___ 1,850 1,921 2,003 48 x 2 x 545/8 1219 x 51 x 1386 KPQAG-5448-_P-___ 2,003 2,074 2,157 60 x 2 x 545/8 1524 x 51 x 1386 KPQAG-5460-_P-___ 2,303 2,372 2,455 24 x 2 x 667/8 610 x 51 x 1700 KPQAG-6624-_P-___ 1,463 1,533 1,616 30 x 2 x 667/8 762 x 51 x 1700 KPQAG-6630-_P-___ 1,608 1,679 1,761 36 x 2 x 667/8 914 x 51 x 1700 KPQAG-6636-_P-___ 1,756 1,826 1,908 42 x 2 x 667/8 1067 x 51 x 1700 KPQAG-6642-_P-___ 1,889 1,958 2,040 48 x 2 x 667/8 1219 x 51 x 1700 KPQAG-6648-_P-___ 2,040 2,111 2,193 60 x 2 x 667/8 1524 x 51 x 1700 KPQAG-6660-_P-___ 2,346 2,416 2,499 Specify 3-circuit or 4-circuit system (surcharge of $140 for 4-circuit). At the end of the product code add, in this order: trim color, upholstery for sides A/B, clear (CG) or frosted (TG) finish for tempered glass (TG, surcharge of $63). Laminate panels, 123/8" H glass segment, non-powered Panel includes the tempered glass segment, in-line junction connectors, top trim, and 2 covers with no cut-outs for raceway. $ 24 x 2 x 421/4 610 x 51 x 1072 KPQLG-4224-NN-___ 1,686 30 x 2 x 421/4 762 x 51 x 1072 KPQLG-4230-NN-___ 1,779 36 x 2 x 421/4 914 x 51 x 1072 KPQLG-4236-NN-___ 1,887 42 x 2 x 421/4 1067 x 51 x 1072 KPQLG-4242-NN-___ 2,091 48 x 2 x 421/4 1219 x 51 x 1072 KPQLG-4248-NN-___ 2,207 24 x 2 x 545/8 610 x 51 x 1386 KPQLG-5424-NN-___ 1,819 30 x 2 x 545/8 762 x 51 x 1386 KPQLG-5430-NN-___ 1,913 36 x 2 x 545/8 914 x 51 x 1386 KPQLG-5436-NN-___ 2,020 42 x 2 x 545/8 1067 x 51 x 1386 KPQLG-5442-NN-___ 2,292 48 x 2 x 545/8 1219 x 51 x 1386 KPQLG-5448-NN-___ 2,406 Laminate panels, 123/8" H glass segment, non-powered (cont’d) A combination of HPL finishes may be applied to each side of a panel. 24 x 2 x 667/8 610 x 51 x 1700 KPQLG-6624-NN-___ 1,952 30 x 2 x 667/8 762 x 51 x 1700 KPQLG-6630-NN-___ 2,052 36 x 2 x 667/8 914 x 51 x 1700 KPQLG-6636-NN-___ 2,159 42 x 2 x 667/8 1067 x 51 x 1700 KPQLG-6642-NN-___ 2,492 48 x 2 x 667/8 1219 x 51 x 1700 KPQLG-6648-NN-___ 2,605 At the end of the product code add, in this order: trim color, HPL finishes for sides A/B, clear (CG) or frosted (TG) finish for tempered glass (TG, surcharge of $63). Laminate panels, 123/8" H glass segment, powered A combination of HPL finishes may be applied to each side of a panel. Panel includes the tempered glass segment, in-line junction connectors, top trim, 2 covers with cut-outs and knock-out communication plates for the raceway, the electric system and the in-line power connector. To be ordered separately: duplex receptacles KER_-_ _-_; refer to pages 29 and 30. 24 x 2 x 421/4 610 x 51 x 1072 KPQLG-4224-_P-___ 1,826 30 x 2 x 421/4 762 x 51 x 1072 KPQLG-4230-_P-___ 1,958 36 x 2 x 421/4 914 x 51 x 1072 KPQLG-4236-_P-___ 2,079 42 x 2 x 421/4 1067 x 51 x 1072 KPQLG-4242-_P-___ 2,292 48 x 2 x 421/4 1219 x 51 x 1072 KPQLG-4248-_P-___ 2,412 24 x 2 x 545/8 610 x 51 x 1386 KPQLG-5424-_P-___ 1,958 30 x 2 x 545/8 762 x 51 x 1386 KPQLG-5430-_P-___ 2,091 36 x 2 x 545/8 914 x 51 x 1386 KPQLG-5436-_P-___ 2,212 42 x 2 x 545/8 1067 x 51 x 1386 KPQLG-5442-_P-___ 2,492 48 x 2 x 545/8 1219 x 51 x 1386 KPQLG-5448-_P-___ 2,612 24 x 2 x 667/8 610 x 51 x 1700 KPQLG-6624-_P-___ 2,091 30 x 2 x 667/8 762 x 51 x 1700 KPQLG-6630-_P-___ 2,233 36 x 2 x 667/8 914 x 51 x 1700 KPQLG-6636-_P-___ 2,352 42 x 2 x 667/8 1067 x 51 x 1700 KPQLG-6642-_P-___ 2,693 48 x 2 x 667/8 1219 x 51 x 1700 KPQLG-6648-_P-___ 2,812 Specify 3-circuit or 4-circuit system (surcharge of $140 for 4-circuit). At the end of the product code add, in this order: trim color, HPL finishes for sides A/B, clear (CG) or frosted (TG) finish for tempered glass (TG, surcharge of $63). Laminate/fabric combined panels, 123/8" H glass segment, non‑powered Panel includes the tempered glass segment, in-line junction connectors, top trim, and 2 covers with no cut-outs for raceway. Gr1 Gr2 Gr3 24 x 2 x 421/4 610 x 51 x 1072 KPQCG-4224-NN-___ 1,558 1,596 1,642 30 x 2 x 421/4 762 x 51 x 1072 KPQCG-4230-NN-___ 1,659 1,698 1,743 36 x 2 x 421/4 914 x 51 x 1072 KPQCG-4236-NN-___ 1,768 1,806 1,850 42 x 2 x 421/4 1067 x 51 x 1072 KPQCG-4242-NN-___ 1,927 1,966 2,009 48 x 2 x 421/4 1219 x 51 x 1072 KPQCG-4248-NN-___ 2,040 2,080 2,125 24 x 2 x 545/8 610 x 51 x 1386 KPQCG-5424-NN-___ 1,679 1,718 1,761 30 x 2 x 545/8 762 x 51 x 1386 KPQCG-5430-NN-___ 1,780 1,819 1,864 36 x 2 x 545/8 914 x 51 x 1386 KPQCG-5436-NN-___ 1,896 1,934 1,978 42 x 2 x 545/8 1067 x 51 x 1386 KPQCG-5442-NN-___ 2,080 2,117 2,162 48 x 2 x 545/8 1219 x 51 x 1386 KPQCG-5448-NN-___ 2,193 2,233 2,278 24 x 2 x 667/8 610 x 51 x 1700 KPQCG-6624-NN-___ 1,743 1,780 1,826 30 x 2 x 667/8 762 x 51 x 1700 KPQCG-6630-NN-___ 1,845 1,882 1,927 36 x 2 x 667/8 914 x 51 x 1700 KPQCG-6636-NN-___ 1,952 1,991 2,035 42 x 2 x 667/8 1067 x 51 x 1700 KPQCG-6642-NN-___ 2,157 2,193 2,239 48 x 2 x 667/8 1219 x 51 x 1700 KPQCG-6648-NN-___ 2,270 2,309 2,354 At the end of the product code add, in this order: trim color, HPL finish for side A, upholstery for side B, clear (CG) or frosted (TG) finish for tempered glass (TG, surcharge of $63). Laminate/fabric combined panels, 123/8" H, glass segment, powered Panel includes the tempered glass segment, in-line junction connectors, top trim, 2 covers with cut-outs and knock-out communication plates for the raceway, the electric system and the in-line power connector. To be ordered separately: duplex receptacles KER_-_ _-_; refer to pages 29 and 30. 24 x 2 x 421/4 610 x 51 x 1072 KPQCG-4224-_P-___ 1,693 1,730 1,775 30 x 2 x 421/4 762 x 51 x 1072 KPQCG-4230-_P-___ 1,831 1,870 1,915 36 x 2 x 421/4 914 x 51 x 1072 KPQCG-4236-_P-___ 1,952 1,991 2,035 42 x 2 x 421/4 1067 x 51 x 1072 KPQCG-4242-_P-___ 2,117 2,157 2,201 48 x 2 x 421/4 1219 x 51 x 1072 KPQCG-4248-_P-___ 2,239 2,278 2,321 24 x 2 x 545/8 610 x 51 x 1386 KPQCG-5424-_P-___ 1,813 1,850 1,896 30 x 2 x 545/8 762 x 51 x 1386 KPQCG-5430-_P-___ 1,952 1,991 2,035 36 x 2 x 545/8 914 x 51 x 1386 KPQCG-5436-_P-___ 2,080 2,117 2,162 42 x 2 x 545/8 1067 x 51 x 1386 KPQCG-5442-_P-___ 2,270 2,309 2,354 48 x 2 x 545/8 1219 x 51 x 1386 KPQCG-5448-_P-___ 2,391 2,430 2,473 19 PARADIGM Panel System USA – FEBRUARY 2025 PARADIGM Panel System

www.groupelacasse.com

Made with FlippingBook

RkJQdWJsaXNoZXIy ODQzOTcy